PDiK HPA conversion for AEG V2 LONG gen3 - ManCraft

The conversion is focused on conversions to DMR and sniper rifles - where a precise shot with long range is required.

Mechanics: The conversion has a independently moving nozzle - just like with AEG rifles. The nozzle position is not directly connected to the position of the gas drive element. This solution ensures that - in the kit during the shot, the nozzle (when the gas starts to be released) is in the Hop Up chamber and the chamber is locked. For this reason, there is better sealing and shot accuracy.

This type of nozzle locking has a big advantage. Thanks to this solution, the rubber wears out less and is usually better sealed.

PDiK operates in semi-automatic mode. This is the only available mode in the conversion kit. The conversion is largely adapted to the needs of a sniper. Because it is possible to achieve relatively high fps here - automatic mode is not necessary. Using the appropriate regulator, it is possible to obtain very stable, high muzzle velocity results. Performance is set by the regulator. Operating pressure is in the range of 7–16 bar.

Construction:

The kit is designed for installation into standard V2/V3 gearboxes and similar

Advantages:

• No electronics (resistance to weather conditions)
• No battery
• Muzzle velocity accuracy
• Adjustable performance
• Compatible with standard AEG parts (nozzle, trigger, sear)
• Instant trigger response

Disadvantages:

• No full automatic mode
• External power supply (from a bottle)

Examples of velocity (barrel length 550 mm, 0.2 g ammunition):

• 8 bar - 150 m/s (492fps)
• 10 bar - 165 m/s (541fps)
• 12 bar - 182 m/s (597fps)
• 16 bar - 203 m/s (666 fps)
• 18 bar - 213 m/s (699 fps)

Set includes: - PDiK - Approx. 1.2m supply hose (fi 6mm)

Set does not include: Trigger, gearbox, air nozzle