Micro mOSFET III - JeffTron

Professionally designed mOSFET intended for airsoft electric guns.
The device increases the guns cadence and battery life compared to the original wiring in the weapon

SPECIFICATIONS:
- Very small dimensions of the device, fits almost anywhere
- Stand-alone device without cables, cables with a maximum cross-section of 1.5 mm2 can be used for the power circuit and a maximum cross-section of 0.5 mm2 for the signal circuit
- Suitable for service centers, if you are not confident in soldering wires to the board, choose the option with cabling and accessories.
- Designed for springs up to m160 (corresponds to a current of 75A for single shots or 25A for burst shooting for a maximum of 30s). For higher loads, choose MOSFET II
- Designed for all types of commonly used batteries up to 17 V (Ni-xx 8.4 - 12V, LiPo 7.4 - 14.8V)
- 5-wire connection
- The plus wire is not connected to the device
- Device size 15x7x5mm
- Trigger contacts do not burn
- No current is drawn in the idle state
- Due to the operating principle of the AEG guns mechanism, the piston stops in a random position in AUTO mode
For the correct function of this device, the gearbox must have a functional cut-off lever, selector plate, anti-reverse latch, trigger, and trigger stop (secured), as in a standard gearbox.

PACKAGE INCLUDES: device, heat shrink tubing and installation manual

WARNING: Installation of this device requires a professional who can solder and disassemble an AEG weapon. Never use a transformer welding machine!