Micro mOSFET II with universal wiring - JeffTron

Professionally designed mOSFET without wiring harness designed for electric airsoft guns from the Czech company JeffTron.
The device increases the cadence of guns and battery life compared to the original wiring in the weapon.

SPECIFICATIONS:

• Very small device dimensions, fits almost anywhere
• Pre-prepared cabling allows for faster and easier installation up to guns, it is long enough for all types of weapons. Simply shorten the wires to the required length and power the connectors (included in the package)
• 2 black wires with silicone insulation with a cross-section of 1.5 mm2, length 500 mm, and a blue wire with a cross-section of 0.25 mm2, length 500 mm, are soldered to the device for connection anywhere to the red wire. Also included in the package is a 1000 mm long red wire with silicone insulation with a cross-section of 1.5 mm2
• Coated in lacquer that protects against water ingress into the device
• If you want to use your own wires, choose the option without wiring
• Intended for springs up to m160 (corresponds to a current of 25A for 10s). For higher loads, choose the Extreme mOSFET (placed outside the gearbox)
• Intended for all types of commonly used batteries up to 17 V (Ni-xx 8.4 - 12V, LiPo 7.4 - 14.8V)
• 5-wire connection
• The positive wire is not connected to the device
• Device dimensions 15x7x5mm
• Trigger contacts do not burn out
• No current is drawn in idle state
• Due to the operating principle of the AEG weapon guns mechanism, the piston stops in a random position in AUTO mode
• For the correct function of this device, it is necessary to have a functional cutoff lever, selector plate cam, anti-reverse latch, trigger, and trigger stop (secured) in the gearbox, as in a standard gearbox

PACKAGE CONTENTS:

• Device with powered wiring
• Deans male connector
• 30A mini blade safety
• 4x faston sleeve
• 6x black sleeve 3.2mm length 20mm
• 3x black sleeve 4.8mm length 20mm
• Installation manual

WARNING:
Installation of this device requires a specialist who can solder and disassemble an AEG weapon. Never use a transformer welding machine!
Despite all efforts, 100% compatibility of the device with all version 2 gearboxes cannot be guaranteed.
For most commonly available and widespread brands, the MOSFET - V2 can be installed without major modification.