Flashlight PD35 TAC - Fenix

The third generation of the ultra-powerful Fenix ​​PD35 TAC flashlight brings a luminous flux of up to 1000 lumens (ANSI) and a choice between outdoor and tactical control. Excellent light output was achieved using the latest Cree XP-L LED with an efficiency of up to 200 lm / W. The flashlight can be powered by two CR123A batteries or one high-capacity Li-ion 18650 battery.

The Fenix ​​PD35 TAC in outdoor mode has six different lighting modes, which are switched by a side button. In tactical mode, there are three modes (maximum, strobe and power saving modes), which are quickly switched with the end button.

The lamp is powered by digitally regulated constant current to guarantee constant light output even when the voltage in the batteries is reduced (during their gradual discharge). The PD35 impresses not only with its small size and huge performance, but also with the possibility of attaching a Fenix ​​AR102 or Fenix ​​AER-02 cable switch. We can therefore recommend it for use in security forces as well as normal outdoor and hunting use.

All lamp parameters (luminous flux, battery life, waterproofness, afterglow and impact resistance) are measured in accordance with the ANSI / NEMA FL 1-2009 standard. Parameters of the Fenix ​​PD35 TAC lamp

 

Parameters of the Fenix ​​PD35 TAC lamp:

• The top powerful Cree XP-L LED with a lifespan of 50,000 hours is used.
• Tactical mode three modes: Turbo 1000 lumens (1.2 hours) -> 60 lumens (29.25 hours) -> Strobe (variable frequency strobe).
• Outdoor mode six modes: Turbo 1000 lumens (1.2 hours) -> 500 lumens (2.9 hours) -> 200 lumens (8.5 hours) -> 60 lumens (29.25 hours) -> 8 lumens (140 hours) -> Strobe (variable frequency strobe).
• Operation on Turbo mode 1000 lumens is limited to 5 minutes at a time, then the lamp switches itself to 500 lumens mode.
• Luminous flux and endurance times are measured with a Fenix ​​18650 rechargeable li-ion battery with a capacity of 3400mAh.
• Digitally controlled for constant brightness, low battery alert.
• Two 3V lithium batteries type CR123A or one rechargeable li-ion battery type 18650 can be used for power supply.
• Smooth parabolic reflector for light cone with afterglow of 200 meters (10000cd).
• Protection against accidental battery insertion upside down (polarity reversal).
• Dimensions 13.7 cm (length) x 2.54 cm (reflector diameter) x 2.25 cm (body diameter).
• Weight 89 grams (without batteries).
• Made of aviation hardened aluminum type T6, durable surface - Type III hard anodized.
• Impact resistant to falls from a height of 1 meter. In outdoor mode, the flashlight remembers the last set lighting mode (does not apply to strobe).
• Trapezoidal threads with increased wear resistance.
• Significant grooving of the surface for better grip, the design prevents the lamp from rotating on an uneven surface.
• Waterproof according to the IPX-8 standard (tested underwater at a depth of 2 meters).
• Removable steel clip with titanium finish.
• Toughened ultra clear glass lens with anti-reflex surface.
• Tactical switch at the end of the flashlight (instantaneous on / off function).
• The flashlight comes with a wrist strap, a belt holster, a spare rubber switch cover and spare o-rings.
• Batteries not included. Optional accessories include: cable switch AR102, cable switch AER-02, red traffic cone AOT-S, diffuser AOD-S, red filter AOF-S, green filter AOF-S, blue filter AOF-S, swivel holder for bike, special Fenix ​​bike holder or bike holder for BikeBlock, mounting on a weapon.

Application:

Switching between outdoor and tactical mode: switch on the flashlight with the limit switch and then hold down the side button for 3 seconds.

By default, the flashlight is set to tactical mode with three lighting modes.

Control in tactical mode: Pressing the limit switch once always switches the flashlight to turbo mode. To switch directly to stroboscopic mode, press the switch twice, to switch to power saving mode three times.

Outdoor mode control: To switch on, press the switch located at the end of the lamp, press the button halfway to activate immediately. You can switch between power modes at any time during operation by pressing the side button on the lamp head. To switch to strobe mode, hold down the side button for about 1 second.

Low battery warning - the flashlight automatically switches to the lowest mode and flashes 3 times every five minutes.

• Do not disassemble the sealed parts of the lamp head yourself, as this will void the warranty.
• Use only high-quality 3V CR123A batteries and 18650 li-ion batteries to prevent damage to the flashlight, for example due to battery leakage.
• If the protective rubber rings appear damaged after prolonged use, replace them. The rings should also be lubricated to prevent rubber erosion. By following these rules, the lamp will be properly protected against water.
• If the flashlight is blinking, does not switch to higher power modes, or does not turn on, this may be due to one of the following reasons:
• The batteries are low - replace them.
• The contacts inside the lamp are dirty - clean them with a cotton swab dipped in alcohol.
• The head, body or rear of the lamp are loose - add lubricant to the sealing rings and tighten them.